Steps for Fitting Turnamic IFP Bindings

This video guides you through the process of installing Turnamic bindings onto IFP plates. This system requires the bindings to be slid onto the mounting plate as follows:

1. Begin by attaching the rear section of the binding to the front section.
2. Adjust it based on your boot size.
3. Then, unlock the binding with a small switch situated on the front piece.
4. Proceed to slide the binding onto the mounting plate.
5. Ensure both the front and rear sections are mounted simultaneously.
6. You can now adjust the position of the binding.
7. The final step is to secure the binding in position.

Your bindings are successfully mounted!