This video guides you through the necessary steps for fitting scooter wheels onto your setup:
- Take two Allen keys to remove the rear axle.
- Hold your wheel and position it into place.
- Next, push the axle through both the deck and the wheel.
- Ensure you always apply grease to your bolts!
- Use your fingers to screw in the bolt, then secure it tightly using two Allen keys.
- The wheel should have no lateral movement but must spin freely.
- It's now time to take out the front axle.
- Place the wheel spacers into the fork and fit the wheel.
- Push the bolt through the fork and wheel.
- Insert the nut and begin tightening.
Your wheels are now fitted!
