The Powerslide replacement wheel axle for skates is presented in this collection. It comes in different lengths, maintaining a consistent 8mm axle thickness.
30mm, featuring a Torx head
29mm, 33mm, 38mm, and 43mm equipped with an Unbraco head
Compatible parts
Find products compatible with Powerslide 8mm Axle:
Urs KaufmannLangnau b. Reiden, SwitzerlandVerified Buyer3 of 5Did not fit Rollerblades Microblades 100Reply from SkateProThank you for taking the time to leave a review. // Your SkatePro TeamMika NokelainenTampere, FinlandVerified Buyer5 of 5💪💪💪Andrei ZimineDalby, SwedenVerified Buyer5 of 5!!!Joachim K.Fels am Wagram, AustriaVerified Buyer2 of 5Unfortunately not as described! The axle itself actually has the correct dimensions, but the bolts are too long to get to the 30mm! In addition, the bolt starts with an M6 thread the last 5 mm have a larger thread, which means even a shortened bolt can not be screwed in completely!Reply from SkateProHey, thanks for the review!
Sorry to hear that the dimensions are not correct! Unfortunately we can't find an email contact for this.
Could you send us some pictures of the axle so we can take a closer look?
Thank you! / Your SkatePro TeamPeter de LeeuwTilburg, NetherlandsVerified Buyer5 of 5TopTommy GrannasVAASA, FinlandVerified Buyer2 of 5The picture does not correspond to the product.Reply from SkateProThank you for your review! The appearance of the axle depends on its length.
/Julia🛴M. ThomasDenzlingen, GermanyVerified Buyer1 of 5In the picture, the axle has a round head for hexagon socket; however, an axle with Torx flat head is supplied... Unfortunately the description is not correctReply from SkateProHello,
Thank you for your feedback.
Please note that the 29 mm version has a round head, with Allen key.
The 30 mm version has a flat head for Torx.
Sorry for the confusion.
Your SkatePro Team/AlexKEVIN LAFRANCEDunkerque, FranceVerified Buyer2 of 5Part of the screws was missing (the nut part), but this was quickly resolved...
A commercial gesture would have been appreciated!Reply from SkateProHello, thank you for your message.
We have indeed returned the missing parts lost in transit as soon as possible :)
Have a nice day.Nicolai AndersenSkanderborg, DenmarkVerified Buyer1 of 5Great product, but the screw could not be screwed in properly, so had to go out and buy afterwards.
Please put some more information on the product or take another picture. Come fresh.Reply from SkateProHi Nicolai
Thank you for your review.
We're sorry to hear that you couldn't use the product. We do everything we can to make our website and its products as transparent as possible, so you know what you are getting. If the product was different than described or there is any special info about this product you want, you are always welcome to contact our customer service and we will be happy to help with this :)
//HjalteRémy B.Brest, FranceVerified Buyer1 of 5Please note that the images and the product description are false.
They won't send you simple screws for plates, but screws to tighten a plate + a brake pad (longer and wider, with a Torx head). They are unusable on a simple turntable. When I returned the product, I sent a "file" explaining the problem, but nothing helped, the staff still hasn't changed the product sheet.
In short, after two or three weeks of discussion with them, I hope my comment will save you the trouble.
Too bad for quad skate pros.
