DIN Calculator – Discover Your Optimal Ski Binding Setting

Easily calculate your tailored DIN setting for ski bindings using our simple calculator.

Input your weight, height, age, skill level, and boot sole length to receive a precise result that enhances safety, guarantees proper binding release, and boosts confidence on the slopes.

DIN Calculator

Provide your information below to determine your DIN setting.

1. Boot Sole length:

mm      More info

Use sole length of ski boot in shopping cart

We need the exact measurement of your boots in mm to fit the binding correctly. The number can be found by measuring the length of the outsole (3 digits). The number is also printed on the boot's heel.

2. Skill / style:

First timer / Very cautious

Beginner / Cautious

Intermediate / Recreational

Advanced / Aggressive

Expert / Aggressive Off-piste

3. Body metrics:

Weight:	Please select 10-13 kg / 22-29 lbs 14-17 kg / 30-38 lbs 18-21 kg / 39-47 lbs 22-25 kg / 48-56 lbs 26-30 kg / 57-66 lbs 31-35 kg / 67-78 lbs 36-41 kg / 79-91 lbs 42-48 kg / 92-107 lbs 49-57 kg / 108-125 lbs 58-66 kg / 126-147 lbs 67-78 kg / 148-174 lbs 79-94 kg / 175-209 lbs 95+ kg / 210+ lbs
Height:	Please select 90-148 cm / 2'11"-4'10" 149-157 cm / 4'11"-5'1" 158-166 cm / 5'2"-5'5" 167-178 cm / 5'6"-5'10" 179-194 cm / 5'11"-6'4" 195+ cm / 6'5"+
Age:	Please select 2-9 years 10-49 years 50+ years

Ordering Skis and Bindings at SkatePro

When purchasing skis and bindings from SkatePro, a DIN calculator will be available during checkout. Input your weight, height, age, skill level, and boot sole length to obtain your unique DIN setting.

Afterwards, choose the handling option for your bindings:

• Mount the bindings yourself
• Let SkatePro handle the mounting
• Request a consultation from a SkatePro professional to verify the correct DIN setting

If SkatePro mounts the bindings, they'll adjust them at no extra cost to match your DIN result, ensuring your skis are ready for safe use. If additional adjustments are necessary, a local ski shop or specialist can make fine-tune adjustments for you.

Understanding a DIN Setting

The DIN value is an industry-standard setting for ski bindings that controls how easily your ski boots will release in a fall. It's essential for balancing safety with performance:

• DIN too low = bindings might release prematurely
• DIN too high = bindings might not release during a fall, leading to higher injury risk

This calculator assists you in finding the appropriate release force based on your measurements and skiing style.

How the DIN Calculator Functions

Our calculation of your DIN number considers:

• Weight – Greater weight often necessitates a higher DIN
• Height – Affects the force during turns and falls
• Age – Adjustments may be necessary for younger and older skiers
• Skill Level – Settings differ from beginner to expert levels
• Boot Sole Length – Measured in millimetres from the heel to the toe of the boot

These factors help to calculate the precise release setting for your bindings - crucial for both safety and performance on the slopes.

Common Questions

Is it possible to set my ski bindings myself?
You can use the calculator to find your DIN number, but it's advisable to have binding installation and final settings done by a skilled technician.

How can I locate my boot sole length?
Usually located on the bottom or back of your ski boot heel, shown in millimetres. Alternatively, measure the outsole length to find the number (3 digits).

What are the consequences of an incorrect DIN setting?
An excessively high setting might prevent release when necessary, while a setting that's too low might result in premature release. Both scenarios raise safety concerns.